Files
wirecon/README.md
T
d4nn13 4e7e0f34ba add optional web UI: busybox httpd + shell CGI, dark theme
- /etc/init.d/wirecon-web supervises `busybox httpd` on WEB_PORT (8080).
- /var/www/wirecon: single-page UI with Status / Config / Logs tabs.
  - Status auto-refreshes every 5s: service states + wg0 endpoint,
    handshake age, MTU, rx/tx.
  - Config edits wg0.conf + wirecon.conf, saves atomically, restarts
    dependents, surfaces their output.
  - Logs tails /var/log/wirecon-{watchdog,monitor}.log.
- CGI returns plain text (key=value or raw) — no JSON-escape pain.
- HTTP Basic Auth template in /etc/wirecon/httpd.conf.
- Disable via `rc-service wirecon-web stop && rc-update del wirecon-web`.
2026-04-19 18:55:36 +02:00

5.7 KiB

wirecon

WireGuard client tooling for an unprivileged Alpine LXC on Proxmox. Connects the LXC to an existing WireGuard server over a flaky uplink (built for Telekom DSL/LTE Hybrid, where MTU pitfalls cause silent stalls) with:

  • a Proxmox-host one-liner that creates the LXC from scratch
  • an OpenRC watchdog that detects stale handshakes / ping loss and re-dials fast
  • a continuous monitor that emits structured logs for post-mortem analysis
  • an MTU probe that finds the real path MTU via DF-ping binary search
  • an optional web UI (busybox httpd + CGI, dark theme) for status, config editing, and log viewing — switch off anytime to save resources

The server side is intentionally out of scope — point the LXC at any existing WireGuard endpoint.

Install

Run on the Proxmox host as root:

curl -fsSL https://git.d4nn13.de/d4nn13/wirecon/raw/branch/main/proxmox/create-lxc.sh | bash

That script:

  1. picks the next free VMID (pvesh get /cluster/nextid)
  2. downloads the latest Alpine template if missing
  3. creates an unprivileged LXC (concad, 1 core, 256 MiB RAM, 2 GiB disk, DHCP on vmbr0, nesting+keyctl features)
  4. appends the /dev/net/tun passthrough to /etc/pve/lxc/<VMID>.conf
  5. starts the container, waits for DHCP
  6. chains into lxc/bootstrap.sh inside the LXC, which clones this repo to /opt/wirecon and runs lxc/install.sh

Override defaults via env vars:

HOSTNAME=tunbox MEMORY=512 STORAGE=fast-nvme \
  bash -c "$(curl -fsSL https://git.d4nn13.de/d4nn13/wirecon/raw/branch/main/proxmox/create-lxc.sh)"

Available overrides: HOSTNAME, CORES, MEMORY, DISK, BRIDGE, STORAGE, TEMPLATE_STORAGE, WIRECON_REPO, WIRECON_REF.

Finishing up (inside the LXC)

pct enter <VMID>

vi /etc/wireguard/wg0.conf        # PrivateKey, Peer PublicKey, Endpoint, MTU, LAN iface in PostUp
vi /etc/wirecon/wirecon.conf      # PEER_IP + watchdog thresholds (optional)

rc-update add wg-quick.wg0     default && rc-service wg-quick.wg0     start
rc-update add wirecon-watchdog default && rc-service wirecon-watchdog start
rc-update add wirecon-monitor  default && rc-service wirecon-monitor  start
rc-update add wirecon-web      default && rc-service wirecon-web      start   # optional

tail -F /var/log/wirecon-watchdog.log /var/log/wirecon-monitor.log

Then open http://<lxc-ip>:8080/ in a browser.

Layout

lxc/
  install.sh                 idempotent apk + OpenRC installer (runs inside the LXC)
  bootstrap.sh               clones repo into /opt/wirecon then calls install.sh
  etc/init.d/                OpenRC services: wirecon-watchdog, wirecon-monitor, wirecon-web
  etc/wirecon/wirecon.conf   tunable thresholds (peer IP, handshake age, MTU bounds, WEB_PORT…)
  etc/wirecon/httpd.conf     busybox httpd config (HTTP Basic Auth template)
  etc/wireguard/wg0.conf.example
  usr/local/bin/
    wirecon-watchdog.sh      one tick: handshake age + in-tunnel ping → reconnect if needed
    wirecon-watchdog-loop.sh supervise-daemon target that re-runs the tick every WATCHDOG_INTERVAL
    wirecon-monitor.sh       long-running structured-log emitter
    wirecon-mtu-probe.sh     DF-ping binary search → recommended WG MTU
  var/www/wirecon/           web UI assets + CGI scripts (status / config / logs)

proxmox/
  create-lxc.sh              host-side LXC provisioner (the one-liner above)
  lxc.conf.snippet           tun passthrough lines (also appended by create-lxc.sh)

How the watchdog decides to reconnect

Every WATCHDOG_INTERVAL seconds (default 20 s), one tick runs:

  1. Interface check — ip link show wg0; if missing → reconnect immediately.
  2. Handshake age — wg show wg0 latest-handshakes; if older than HANDSHAKE_MAX_AGE (default 180 s), mark failure.
  3. In-tunnel ping — ping -I wg0 -c 3 -W 2 $PEER_IP; if loss ≥ PING_LOSS_THRESHOLD, mark failure.
  4. Failure streak — only after FAIL_STREAK_THRESHOLD consecutive failed ticks (default 2 = 40 s) does it actually wg-quick down && up. This prevents a single LTE hiccup from thrashing the tunnel.

Every decision — pass, fail, streak bump, reconnect — is logged as a single key=value line with a reason.

Tuning

File What to tune
/etc/wireguard/wg0.conf MTU (run wirecon-mtu-probe.sh first), LAN iface in the PostUp iptables MASQ rules
/etc/wirecon/wirecon.conf PEER_IP, HANDSHAKE_MAX_AGE, PING_LOSS_THRESHOLD, FAIL_STREAK_THRESHOLD, WATCHDOG_INTERVAL, MONITOR_INTERVAL

Logs

Both services write key=value structured lines; grep and awk friendly:

tail -F /var/log/wirecon-watchdog.log /var/log/wirecon-monitor.log
grep event=reconnect /var/log/wirecon-watchdog.log
awk -F'rtt_ms=' '/rtt_ms=/{split($2,a," "); print $0}' /var/log/wirecon-monitor.log

Web UI

Optional. Serves at http://<lxc-ip>:8080/ — dark theme, three tabs:

  • Status — running/stopped state for each service, live wg0 endpoint + handshake age + rx/tx (auto-refresh every 5s).
  • Config — edit /etc/wireguard/wg0.conf and /etc/wirecon/wirecon.conf in-browser; saving triggers a restart of the affected services and returns their stdout.
  • Logs — tail of wirecon-watchdog.log and wirecon-monitor.log.

Runs on busybox httpd (~2 MiB RSS) with shell CGI — no Python/Go runtime needed. Disable anytime:

rc-service wirecon-web stop
rc-update del wirecon-web

Security: the UI edits wg0.conf (contains private keys) and restarts services, so expose it on the LAN only. Enable HTTP Basic Auth by adding a line to /etc/wirecon/httpd.conf:

# generate hash:  openssl passwd -1 'your-password'
/:admin:$1$salt$hash

Change WEB_PORT / WEB_BIND in /etc/wirecon/wirecon.conf and restart wirecon-web to move it.